Firmware Maxwell C, Maxwell Basic + Maxwell 2 + Maxwell 3 + Maxwell Expansion

ehemals Siemens
Antworten
Nachricht
Autor
MuP
Globaler Moderator
Globaler Moderator
Beiträge: 545
Registriert: 21. Okt 2017 12:03
Wohnort: §9 Satz 1 AO
Hat sich bedankt: 15 Mal
Danksagung erhalten: 8 Mal
Status: Offline

Firmware Maxwell C, Maxwell Basic + Maxwell 2 + Maxwell 3 + Maxwell Expansion

#1 Beitrag von MuP » 21. Okt 2017 12:49

Firmware
Version: 2.18.4

New
•[Maxwell 3 only] Export/import local phone-book to USB drive. (USB formatted FAT32)
The USB port is also used for Bluetooth headsets, Maxwell Basic and 2 do not have an USB port

Enhancements
•Optimization of Info Screen
•[XML Phonebook] Possibility to enable/disable auto-lookup
•Maxwell 3 Request for additional parameters in the 'INFO' menu
•MWI with and without counter support
•Direct access via HTTP URL protected with password Broadsoft specific implementation
•HTTP authentication via MMI
•XSI authentication with SIP credentials
•XSI authentication with HTTP XSI credentials
•Feature Key Synchronization (Application Server Feature Event Package)
•Automatic or Manual assignment of Broadsoft BLF keys
•Call Lists support
•XSI Phonebooks
•Call Center agent

Bugfixes
•[Phonebook] Maxwell does not react on PTT button - resolved
•Second consultation call is not working as expected - resolved
•Wrong translation on Softkeys in Idle - resolved
•Maxwell does not obtain IP address - resolved
•Incorrect name on the calling screen - resolved
•[Name replacement] Long names are shown incorrect – ‘…’ at the beginning - resolved
•[LDAP][Display format] Non-configured parameters are replaced by 'givenName' - resolved
•In a redundant environment BLF doesn't work once is connected to the backup SIP Server - resolved
•[WebUI] Missing popup "Entry is required" in Quick Dial Keys - resolved
•No in-band tone for blind transfer - resolved
•[MWI] Visual Call Notification (LED) - Voicemail - resolved
•[Doorcall] Problems with doorcall - resolved
•[EHS] After call there is no audio on Maxwell 3 - resolved
•FK "Line" when Call waiting is off does not work properly - resolved
•[PIN] Freezing WebUI after entering Phone PIN - resolved
•[Conference] [G729] Very low sound quality during conference - resolved
•[USB] USB headset does not return to idle state after call is terminated - resolved
1u1/DSL +++ VDSL2.17A.ITU.G.993.2/BC177.140
F!B7580/153.06.92/DSL1.148.136.11 +++ F!R1750E/134.06.93
N510IP/42.247 +++ 5xSL750H/116.074.04/CT1805

Firmware N510IP A510IP C430IP C530IP C590IP C595IP C610IP N300IP GOBox100

MuP
Globaler Moderator
Globaler Moderator
Beiträge: 545
Registriert: 21. Okt 2017 12:03
Wohnort: §9 Satz 1 AO
Hat sich bedankt: 15 Mal
Danksagung erhalten: 8 Mal
Status: Offline

Maxwell Expansion Module

#2 Beitrag von MuP » 23. Okt 2017 09:42

Maxwell Expansion Module

Device Firmware
The device firmware will be updated automatically, if necessary, via Maxwell Basic or 3.
The firmware image of the Expansion Module is included in the firmware image of the Maxwells to ensure, that always a valid firmware base for interconnection is available.

Power supply
You need to order one power supply (L36280-Z4-X765), this is not included, One power supply is always needed, also when the Maxwell phone is using a Power supply.
With one power supply you can connect up to 3 Expansion modules.
1u1/DSL +++ VDSL2.17A.ITU.G.993.2/BC177.140
F!B7580/153.06.92/DSL1.148.136.11 +++ F!R1750E/134.06.93
N510IP/42.247 +++ 5xSL750H/116.074.04/CT1805

Firmware N510IP A510IP C430IP C530IP C590IP C595IP C610IP N300IP GOBox100

MuP
Globaler Moderator
Globaler Moderator
Beiträge: 545
Registriert: 21. Okt 2017 12:03
Wohnort: §9 Satz 1 AO
Hat sich bedankt: 15 Mal
Danksagung erhalten: 8 Mal
Status: Offline

Nachrichten direkt an ein Maxwell 2 oder 3 senden

#3 Beitrag von MuP » 27. Okt 2017 11:36

Beispiel:
sipsak -i -M -B "Text der Nachricht" -s sip:1012@192.168.178.37
1u1/DSL +++ VDSL2.17A.ITU.G.993.2/BC177.140
F!B7580/153.06.92/DSL1.148.136.11 +++ F!R1750E/134.06.93
N510IP/42.247 +++ 5xSL750H/116.074.04/CT1805

Firmware N510IP A510IP C430IP C530IP C590IP C595IP C610IP N300IP GOBox100

Kalle2006
Co-Moderator
Co-Moderator
Beiträge: 38
Registriert: 27. Okt 2017 17:29
Wohnort: NRW
Danksagung erhalten: 1 Mal
Status: Offline

Maxwell Basic + Maxwell 2 + Maxwell 3

#4 Beitrag von Kalle2006 » 27. Okt 2017 18:47

Die Firmware 2.18.4 hat zumindestens bei der Nutzung der Telefone an der bintec be.IP plus oder der Digitalisierungsbox Premium einen gravierenden Fehler: Anrufe die "elsewhere" entgegengenommen werden, landen trotzdem in den entgangenen Anrufen.
Lt. bintec elmeg ist Gigaset das Problem bekannt, und es wird (hoffentlich) bald behoben.
1.) Telekom MagentaZuhause S - DSL 16000
2.) NetCologne VDSL 50
Sipgate VoIP, blueSIP, Personal-Voip, voip2gsm
bintec RS353jv, bintec be.IP plus, elmeg IP630, Gigaset N510 IP Pro, Gigaset S510H Pro, R650H, OpenStage 40 SIP, Yealink T48G, Gigaset S850 A GO, DECT150, D140, Gigaset Maxwell 3 + Extention,
Erfahrungen mit Installationen von bintec be.ip plus / Digitalisierungsbox Smart, Premium & DECT 150 / D141 + Elmeg S560 u.v.m.

Kalle2006
Co-Moderator
Co-Moderator
Beiträge: 38
Registriert: 27. Okt 2017 17:29
Wohnort: NRW
Danksagung erhalten: 1 Mal
Status: Offline

Maxwell Basic + Maxwell 2 + Maxwell 3

#5 Beitrag von Kalle2006 » 10. Nov 2017 20:51

Hier noch die Antwort von Gigaset auf mein Ticket zum "elsewhere" - Problem:

Das bisherige Verhalten bei Call completed elsewhere wird mit Softwareversion 2.19 wieder hergestellt.

Einen Termin können wir zum jetzigen Zeitpunkt allerdings nicht nennen.
1.) Telekom MagentaZuhause S - DSL 16000
2.) NetCologne VDSL 50
Sipgate VoIP, blueSIP, Personal-Voip, voip2gsm
bintec RS353jv, bintec be.IP plus, elmeg IP630, Gigaset N510 IP Pro, Gigaset S510H Pro, R650H, OpenStage 40 SIP, Yealink T48G, Gigaset S850 A GO, DECT150, D140, Gigaset Maxwell 3 + Extention,
Erfahrungen mit Installationen von bintec be.ip plus / Digitalisierungsbox Smart, Premium & DECT 150 / D141 + Elmeg S560 u.v.m.

Kalle2006
Co-Moderator
Co-Moderator
Beiträge: 38
Registriert: 27. Okt 2017 17:29
Wohnort: NRW
Danksagung erhalten: 1 Mal
Status: Offline

Firmware Maxwell Basic + Maxwell 2 + Maxwell 3 + Maxwell Expansion

#6 Beitrag von Kalle2006 » 22. Nov 2017 12:02

Firmware
Version: 2.19.6

New
• SIP timers verification
• tftp can be used for provisioning
• Translations are updated
• Call Park & Retrieve

Enhancements
• Display improvement for Multiple lines support
• [FunctionKeys] BLF and Line key are signalling the status for setting "Standard"
• Display Call lists in web-interface
• Delete SIP message display on Maxwell via empty SIP message
• Increase Standby Brigthness of Display
• Brightness adjustment via MMI and Web-UI
• [Provisioning] If provisioning.xml is not present, MAC.xml is downloaded
• No WebUI access after network settings changed
• BLF - reduce network traffic, without losing subscriptions on server
• Increase Standby Brigthness of Display
• VRU 1.0 (failover/failback) - remove additional DNS query A
• Disconnect network cable during provisioning is stopping the provisioning process
• BLF - wrong status indication on second connection
• Ringtone handling via provisioning
• Firmware update is proceded, even if provisioning fails
• BLF - network traffic reduced

Bugfixes
• Subscription to Broadsoft BLF need to be reorganize - resolved
• [Vodafone] Synchronise BLF with ExtMod connect status - resolved
• FK "Line" when Call waiting is off does not work properly - resolved
• [WebUI][IE] Certificate details are not displayed - resolved
• Maxwell 3/B with provider Siptize- outgoing calls are not possible because the destination port is not correct - resolved
• Have to press the PTT button twice to take a call - resolved
• Maxwell does not upload configuration to server - resolved
• Missing pop up: File is not supported - resolved
• Imposible ringing from PhoneBook - resolved
• [Maxwell 3] French translation issue
• [WebUI] User password accepts invalid characters - resolved
• [Broadsoft][BLF] SIP Subscribe is sent also for non-default account - resolved
• Phone PIN on WebUI is not working as expected - resolved
• SIP application crash when send BLF SUBSCRIBE in failover/failback scenario - resolved
• [XSI phonebook] Maxwell doesn't request for a next part of data while scrolling using long press - resolved
• [WebUI][Broadsoft] Missing 'Entry too long' label while enter too long name - resolved
• [LDAP] Additional attribute is not visible if set as callable - resolved
• "Call Completed Elsewhere" no longer working - resolved
• [LDAP] Maxwell does not go to Select Number screen - resolved
• XML directories - missing popup - resolved
• Failed Registration Retry Timer is not used - resolved
• SIP crashes on outgoing calls - resolved
• [LDAP] CallHistory request for name lookup when LDAP directory is disabled - resolved
• Maxwell doesn't change + to 000, when use contact from redial list - resolved
• [Broadsoft] No space character between CNIP and CLIP during consultation. - resolved
• [LDAP] Select Line state is not reached after Off Hook - resolved
.
1.) Telekom MagentaZuhause S - DSL 16000
2.) NetCologne VDSL 50
Sipgate VoIP, blueSIP, Personal-Voip, voip2gsm
bintec RS353jv, bintec be.IP plus, elmeg IP630, Gigaset N510 IP Pro, Gigaset S510H Pro, R650H, OpenStage 40 SIP, Yealink T48G, Gigaset S850 A GO, DECT150, D140, Gigaset Maxwell 3 + Extention,
Erfahrungen mit Installationen von bintec be.ip plus / Digitalisierungsbox Smart, Premium & DECT 150 / D141 + Elmeg S560 u.v.m.

MuP
Globaler Moderator
Globaler Moderator
Beiträge: 545
Registriert: 21. Okt 2017 12:03
Wohnort: §9 Satz 1 AO
Hat sich bedankt: 15 Mal
Danksagung erhalten: 8 Mal
Status: Offline

Hinweis zur Firmware

#7 Beitrag von MuP » 28. Nov 2017 09:46

Maxwell Basic, 2 + 3 werden aktuell noch mit Firmware v2.18.4 produziert und ausgeliefert.
Die offiziell freigebene Release ist v2.19.6.

Die v2.19.6 oder eine höhere Version wird zwecks Vermeidung von Inkompatibilitäten zur Nutzung empfohlen.
1u1/DSL +++ VDSL2.17A.ITU.G.993.2/BC177.140
F!B7580/153.06.92/DSL1.148.136.11 +++ F!R1750E/134.06.93
N510IP/42.247 +++ 5xSL750H/116.074.04/CT1805

Firmware N510IP A510IP C430IP C530IP C590IP C595IP C610IP N300IP GOBox100

MuP
Globaler Moderator
Globaler Moderator
Beiträge: 545
Registriert: 21. Okt 2017 12:03
Wohnort: §9 Satz 1 AO
Hat sich bedankt: 15 Mal
Danksagung erhalten: 8 Mal
Status: Offline

Firmware 2.19.6 known issues

#8 Beitrag von MuP » 21. Dez 2017 12:30

Known Issues

• Provisioning via Gigaset Redirect Server and HTTP Digest used at platform provisioning server will fail.
•• Maxwell will send empty HTTP digest username.
•• Will be solved in 2.21
•• Workaround is to enter server URL manually in device via web-interface or use DHCP option 114 or 66
1u1/DSL +++ VDSL2.17A.ITU.G.993.2/BC177.140
F!B7580/153.06.92/DSL1.148.136.11 +++ F!R1750E/134.06.93
N510IP/42.247 +++ 5xSL750H/116.074.04/CT1805

Firmware N510IP A510IP C430IP C530IP C590IP C595IP C610IP N300IP GOBox100

MuP
Globaler Moderator
Globaler Moderator
Beiträge: 545
Registriert: 21. Okt 2017 12:03
Wohnort: §9 Satz 1 AO
Hat sich bedankt: 15 Mal
Danksagung erhalten: 8 Mal
Status: Offline

Firmware Maxwell Basic + Maxwell 2 + Maxwell 3 + Maxwell Expansion

#9 Beitrag von MuP » 21. Dez 2017 18:34

Firmware
Version: 2.20.6

New
•Usage of DHCP Option 12

Enhancements
•IVR in pre-connection mode: device has not yet received the 200OK/SDP (no charge) during the greeting message and must send DTMF
•Maxwell 3/2/b WebGui - Target number field does accept all characters
•[Broadsoft] Directories - Switch to enable/disable auto-lookup
•[Broadsoft] Flexible seating functionality
•[Broadsoft] Remote Office
•Possibility to disable the PC Port
•Same VLAN ID cannot be set for "NET" and "PC" port
•Incoming call during active Call (Call waiting) shows the "via (Line)" information
•Possibility to search the Local Phone-book
•[Maxwell 3 - Function Keys] Target number field accepts special characters
•Basic support for speaker Jabra 510
•Accepting SRTP calls with RTP/AVP and crypto
•Setting same VLAN ID to LAN and PC port prohibited

Bugfixes
•[XML directory] Http digest authentication doesn't work
•Cannot make a consultation/call transfer from CallList
•Search for "Name" in the 'advanced search' doesn't work
•[XML Directories] Maxwell does not return to proper entry
•[Broadsoft] BLF's disappear after entering Select Services via PhoneUI
•Problems with searching in XML directories
•Two accounts with the same number are not distinguished
•[Galilei][Call list] No automatic refresh of the Call List on Maxwell after deleting entries on Server
•[LDAP] Incorrect speechpath mode while outgoing call from 'Select number'
•[Broadsoft] BLF's disappear after entering Select Services via PhoneUI
•[XML Directory] Incorrect name on calling screen
•[XSI] Group and Enterprise Directory - randomly empty
•When on call via receiver the Function key dialing is done via handsfree
•REFER with triple Supported: eventlist
•Transfer to contact from Call history impossible
•[SIP] Subscribe timers don't work immediately after change
•[SIP] BLF subscription isn't changed immediately
•No IP address after boot

Known Issues
•Provisioning via Gigaset Redirect Server and HTTP Digest used at platform provisioning server will fail. Maxwell will send empty HTTP digest username.
••Will be solved in 2.21
••Workaround is to enter server URL manually in device via web-interface or use DHCP option 114 or 66

Download
.
201712211834.PNG
.
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
1u1/DSL +++ VDSL2.17A.ITU.G.993.2/BC177.140
F!B7580/153.06.92/DSL1.148.136.11 +++ F!R1750E/134.06.93
N510IP/42.247 +++ 5xSL750H/116.074.04/CT1805

Firmware N510IP A510IP C430IP C530IP C590IP C595IP C610IP N300IP GOBox100

MuP
Globaler Moderator
Globaler Moderator
Beiträge: 545
Registriert: 21. Okt 2017 12:03
Wohnort: §9 Satz 1 AO
Hat sich bedankt: 15 Mal
Danksagung erhalten: 8 Mal
Status: Offline

Firmware Maxwell Basic + Maxwell 2 + Maxwell 3 + Maxwell Expansion

#10 Beitrag von MuP » 12. Jan 2018 10:40

Die Firmware 2.20.6 wurde offiziell als Release-Version freigegeben.
1u1/DSL +++ VDSL2.17A.ITU.G.993.2/BC177.140
F!B7580/153.06.92/DSL1.148.136.11 +++ F!R1750E/134.06.93
N510IP/42.247 +++ 5xSL750H/116.074.04/CT1805

Firmware N510IP A510IP C430IP C530IP C590IP C595IP C610IP N300IP GOBox100

MuP
Globaler Moderator
Globaler Moderator
Beiträge: 545
Registriert: 21. Okt 2017 12:03
Wohnort: §9 Satz 1 AO
Hat sich bedankt: 15 Mal
Danksagung erhalten: 8 Mal
Status: Offline

Maxwell Expansion - Stromversorgung und Firmwareupdate

#11 Beitrag von MuP » 24. Jan 2018 11:38

Es muss beim Einsatz des Expansion - Modules mindestens 1 Stück Stromversorgungseinheit L36280-Z4-X765 bestellt werden.
Die Stromversorgungseinheit ist nicht im Lieferumfang des Expansion - Modules enthalten.
Mit einer Stromversorgungseinheit könne 3 Stück Expansion - Modules versorgt werden.
Das Maxwell - Telefon liefert hierfür keine Stromversorgung.

Die Expansion-Modul-Firmware wird nach der Verbindung mit dem Maxwell - Telefon automatisch auf den neuesten Stand gebracht.
1u1/DSL +++ VDSL2.17A.ITU.G.993.2/BC177.140
F!B7580/153.06.92/DSL1.148.136.11 +++ F!R1750E/134.06.93
N510IP/42.247 +++ 5xSL750H/116.074.04/CT1805

Firmware N510IP A510IP C430IP C530IP C590IP C595IP C610IP N300IP GOBox100

MuP
Globaler Moderator
Globaler Moderator
Beiträge: 545
Registriert: 21. Okt 2017 12:03
Wohnort: §9 Satz 1 AO
Hat sich bedankt: 15 Mal
Danksagung erhalten: 8 Mal
Status: Offline

Firmware Maxwell Basic + Maxwell 2 + Maxwell 3 + Maxwell Expansion

#12 Beitrag von MuP » 1. Mär 2018 12:53

Ab v2.22 wird der NTP Service erweitert

NTPServiceDisabled = Setting "Local" in web-interface, time is set manually.
NTPServiceEnabled = NTP server via provisioning, if not send then use DHCP option 42
NTPServiceManual = NTP server is entered manually via the web-interface.
NTPServiceDHCP = Use DHCP option 42
1u1/DSL +++ VDSL2.17A.ITU.G.993.2/BC177.140
F!B7580/153.06.92/DSL1.148.136.11 +++ F!R1750E/134.06.93
N510IP/42.247 +++ 5xSL750H/116.074.04/CT1805

Firmware N510IP A510IP C430IP C530IP C590IP C595IP C610IP N300IP GOBox100

MuP
Globaler Moderator
Globaler Moderator
Beiträge: 545
Registriert: 21. Okt 2017 12:03
Wohnort: §9 Satz 1 AO
Hat sich bedankt: 15 Mal
Danksagung erhalten: 8 Mal
Status: Offline

Firmware Maxwell Basic + Maxwell 2 + Maxwell 3 + Maxwell Expansion

#13 Beitrag von MuP » 6. Mär 2018 09:28

Firmware
Version: 2.22.7

New
•JABRA USB phone interface
•Voice Quality Monitoring: RTCP-XR
•Add entry field "Target number" for Function Keys Call Divert for Phone-systems Teles and Broadsoft

Enhancements
•Disable lookup requests for CallHistory
•Option to choose the NTP source
•[Teles] Call transfer not working if Maxwell is transferred
•Improvement with Broadsoft remote office implementation
•[Broadsoft][Teles] Disable "Voice Mail" option when number is not configured
•Use CNIP containing name replacement for calls from history
•Refresh automatic BLF's after provisioning
•Call number from Call Lists when handset is off-hook or speakerphone is activated.
•NTP - add config option, to disable revDNS querys (PTR), when NTP server is set as FQDN.
•Improve auto-answer to support more systems.
•Provisioning parameter to hide Distinctive Ringing.
•Voicemail menu, new message notification (MWI) for each account when multiple lines are used.
•[Voipgrid] For BLF pick-up via INVITE `;early-only' is needed

Bugfixes
•[Provisioning][Redirect] Request are send to both servers
•[MAX2] [Headset] Short strange voice after accepting call by "Headset Key"
•[Broadsoft] call divert is not working correct, this happens only the first time after factory reset.
•VLAN settings are set, but the phone does not use them
•[Broadsoft] Flexseating improvement
•Failover - Maxwell try send SUBSCRIBE==0 to primary server, which is unavailable.
•USB headset still rings, when call is ended by handset
•[Maxwell basic] Open call logs shows all calls and not list selection
•Call transfer Maxwell Basic using center key is not working
•USB headsets do not end the call on reject
•[OngoingCalls] No working Back Key in Info Menu state
•[USB] Wrong connected device icon
•Problem with pressing Mute Button on Plantronics
•Can not go to Dial Number via pressing PTT button
•Blind transfer using LDAP directory does not work
•Absence of "Save Number" option in the Call History lists
•Muting USB headset during incoming call rejects the call
•IP static address is not accepted after second and next changing
•[LDAP] dialling number from LDAP contains special characters is not possible using 'Select Line' and 'Use number' option
•Outgoing calls from redial is not performed via "select line" when receiver is off-hook and user
•[Broadsoft] BLF are not deleted if they are removed from Broadsoft WebUI
•Wrong displayed number in Call Divert
•[Clearvox] External CLIP after transfer shown after pickup, to late
•No line seizure tone after fake or missed call
•Ringtones missing synchronization with the PhoneUI
•Two entries with name 'Doorstation' in Melodies
•Inband tone in active call
•[Local Directory] No possibility to use special characters in the middle of name
•[Maxwell Basic]Incorrect display of the version number
•Long caller name simultaneous calls cut at the left side, only Maxwell basic
•[Teles] Ring splash is saved in call list
•[Broadsoft] Switching Call divert via Function Key doesn't work
•[Local Directory] Missing popup "No Entries"
•Melody is not saved in External Calls/ Internal Calls/ Group Calls/ Doorstation on PhoneUI
•Fqdn improvement
•Maxwell does not obtain IP address
•Device Name in Network isn't changed properly
•[Sennheiser] EHS - Lack of speech path
•[NTP] If more than one NTP server address is sent via DHCP Option 42 no NTP queries are sent
•[BLF] LED status changed too late, when network is lost

Download
.
201803061015.PNG
.
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
1u1/DSL +++ VDSL2.17A.ITU.G.993.2/BC177.140
F!B7580/153.06.92/DSL1.148.136.11 +++ F!R1750E/134.06.93
N510IP/42.247 +++ 5xSL750H/116.074.04/CT1805

Firmware N510IP A510IP C430IP C530IP C590IP C595IP C610IP N300IP GOBox100

MuP
Globaler Moderator
Globaler Moderator
Beiträge: 545
Registriert: 21. Okt 2017 12:03
Wohnort: §9 Satz 1 AO
Hat sich bedankt: 15 Mal
Danksagung erhalten: 8 Mal
Status: Offline

Firmware Maxwell Basic + Maxwell 2 + Maxwell 3 + Maxwell Expansion

#14 Beitrag von MuP » 4. Apr 2018 22:08

Firmware 2.22.7

Known Issue
•Using Internet Explorer for configuration via Web-Browser is not possible
1u1/DSL +++ VDSL2.17A.ITU.G.993.2/BC177.140
F!B7580/153.06.92/DSL1.148.136.11 +++ F!R1750E/134.06.93
N510IP/42.247 +++ 5xSL750H/116.074.04/CT1805

Firmware N510IP A510IP C430IP C530IP C590IP C595IP C610IP N300IP GOBox100

MuP
Globaler Moderator
Globaler Moderator
Beiträge: 545
Registriert: 21. Okt 2017 12:03
Wohnort: §9 Satz 1 AO
Hat sich bedankt: 15 Mal
Danksagung erhalten: 8 Mal
Status: Offline

Maxwell C neu auf dem Markt

#15 Beitrag von MuP » 31. Mai 2018 07:29

Gigaset hat das neue Maxwell C auf den Markt gebracht.
1u1/DSL +++ VDSL2.17A.ITU.G.993.2/BC177.140
F!B7580/153.06.92/DSL1.148.136.11 +++ F!R1750E/134.06.93
N510IP/42.247 +++ 5xSL750H/116.074.04/CT1805

Firmware N510IP A510IP C430IP C530IP C590IP C595IP C610IP N300IP GOBox100

Antworten

Zurück zu „Gigaset“